With innovative products and appropriate application technique, it's all possible. If you can envision it, Parex USA can bring it to life.
Get more info.
Color Charts
Perma-Flex® Acrylic Stucco Finish Colors
| Sage 803 |
River Rock 1565 |
Vega 1570 |
Dry River 817 |
Rio Bravo 825 |
| Pottery 1566 |
Yellow Horse 801 |
Casa 827 |
Clay 1571 |
Cactus Flower 814 |
| Buffalo 806 |
Stone Bluff 351 |
Tierra 272 |
Husk 1567 |
Taos 1569 |
| Deerskin 1568 |
Lariat 851 |
Hogan 1572 |
Stoneledge 426 |
Musket 433 |
| Timber 428 |
Granite 422 |
Horizon 4289 |
Peak 430 |
Summit 448 |
| Ore 445 |
Acorn 425 |
Pronghorn 421 |
Twilight 423 |
Silverton 427 |
| Kettle 447 |
Hairstone 444 |
Aurora 446 |
Kona 1642 |
Pale 1632 |
| Wharf 1637 |
Beach 1639 |
Pagent 1633 |
Tea 1636 |
Castle 1630 |
| Skiff 1644 |
Palm 1631 |
Reef 1638 |
Orca 1645 |
Almond 1628 |
| Sesame 1634 |
Falcon 1635 |
Sail 1643 |
Mist 1641 |
Cashew 1629 |
| Billow 1640 |
El Rey's Perma-Flex® Acrylic Stucco Finishes are 100% acrylic based used as a decorative coating for exterior and interior wall and ceiling applications. Perma-Flex Acrylic Stucco is available in three performance levels, up to six textures and a wide range of color and texture possibilities. All Perma-Flex finishes are suitable for use over properly prepared portland cement basecoats and El Rey Insul-Flex® (EIFS) assemblies. Perma-Flex Acrylic Stucco is designed as a crack resistant finish, but is not crack proof. For more detailed information, contact El Rey Stucco.
Due to individual computer screen limitations, colors shown here may not accurately reflect the Parex USA colors.
The colors shown are intended to show the approximate color of the finish. Color will vary depending on the type selected. Application by machine spray or texturing will increase the depth of the color. Variation in color due to weather, job conditions, and method of application should be expected. For color verification, request actual sample in the color and texture prior to ordering material. Apply a sample of finish to be used on actual substrate before proceeding with the application. ParexUSA is not responsible for color correctness of applied finish. Color must be verified and approved by owner prior to application.
