Envision

With innovative products and appropriate application technique, it's all possible. If you can envision it, Parex USA can bring it to life.
Get more info.

Products

Product Selector View our new products

All products below are listed alpha-numeric order. These listed products can be narrowed by using the search filters to the right. These filters cover the following areas:

  • Systems & Assemblies: will list only product allowed for the selected type of system or assembly
  • Product Category: Will only list products in the category chosen
  • Division: Will only list products are for use in that CSI division

Step 1: Select First Filter
Select the first filter to search by. If filter meets searching needs no further search action is needed.

 

Step 2: Select Second Filter (Optional)
If listed products need to be refined further, select another filter from the remaining two to further refine results.

 

Step 3: Select Last Filter (Optional)
If listed products need to be refined further, select final remaining filter to further refine results.

Search by:

Start over

Insul-Bond P (Pre-blended)

A base Coat for El Rey EIFS. Adhesive to laminate EPS to listed substrates. Applied without the addition of cement. Mixed on site with water. Excellent workability.

Parex USA 352 Adhesive

4.5 oz fiberglass mesh 19 in (48.2 cm) wide mesh. Self-adhesive, facilitates the wrapping of complex contours. Is alkali-resistant. NOTE: Complex architectural details only, not for use on full walls.

Parex USA 355 Standard Mesh

4.5 oz fiberglass 38 in. (96.5 cm) wide mesh. Is highly flexible for full walls or details. Is alkali-resistant. Standard reinforcement of Parex USA EIFS walls for impact resistance and details. Required in combination with 358.14 High Impact Mesh or 358.20 Ultra High Impact Mesh. May be used in Parex USA Krak-Shield assemblies.

Parex USA 356 Short Detail Mesh

4.5 oz fiberglass 9.5 in. (24 cm) wide mesh. Is highly flexible for use on details. is alkali-resistant. Ideal for use in back wrapping, corners, reveals and trim. May be used in combination with 355, 358.6 & 358.10 meshes in Parex USA Krak-Shield assemblies.

Parex USA 357 Corner Mesh

7.2 oz fiberglass 9.5 in. (24 cm) wide mesh. Is a heavy duty mesh designed to fold uniformly around corners to reinforce, enhance impact and abuse resistance.. Is alkali-resistant. Used in combination with 355 Standard Mesh, 356 Short Detail Mesh, 358.10 Intermediate Mesh, 358.14 High Impact Mesh or 358.20 Ultra High Impact Mesh. May be used in Parex USA Krak-Shield assembly.

Parex USA 358.10 Intermediate Impact Mesh

12 oz fiberglass 38 in. (96.5 cm) wide mesh. Is an intermediate strength mesh used to enhance impact and abuse resistance. Is alkali-resistant. Use with Parex USA EIFS to achieve EIMA's medium impact strength classification. Can be used in combination with 355 Standard Mesh and 356 Short Detail Mesh. May be used in Parex USA Krak-Shield assembly.

Parex USA 358.14 High Impact Mesh

15 oz fiberglass 38 in. (96.5 cm) wide mesh. A high strength mesh used to enhance impact and abuse resistance. Is alkali resistant. Use with Parex USA EIFS to achieve EIMA's high-impact strength classification. 355 Standard Mesh is required in combination with 358.14 High Impact Mesh.

Parex USA 358.6 - 6 oz Mesh

6 oz fiberglass 38 in. (96.5 cm) wide mesh. Is the next level strength mesh used to enhance impact and abuse resistance. Is alkali Resistant. Can be used in combination with 355 Standard Mesh, 356 Short Detail Mesh, 358.14 High Impact Mesh or 358.20 Ultra High Impact Mesh. May be used in Parex USA Krak-Shield assembly.

Parex USA 600 Clear Sealer

A 100% acrylic transparent coating. Contains EPA-registered mildewcide and algicide. Dirt resistant. The coating hardens and does not soften under solar heating. The nontacky surface provides high resistance to accumulation of dirt and pollutants. Water vapor permeable.

Parex USA 610 Matte Clear Sealer

A 100% acrylic transparent coating. Developed with a special matte agent to reduce sheen.Contains EPA-registered mildewcide and algicide. Dirt resistant. The coating hardens and does not soften under solar heating. The nontacky surface provides high resistance to accumulation of dirt and pollutants. Water vapor permeable.

Parex USA Accel-Pak-Rapid Set Admix

Rapid set admix for any Parex USA polymer modified EIFS Base Coat & Adhesive to reduce set time for Winter weather or quick EIFS patch & repair work.

Parex USA DPR Coating

A 100% acrylic-based non-textured coating. DPR (Dirt Pick-up Resistance): The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants. Excellent hiding power as well as flexibility and drying characteristics. The surface of the coating hardens and does not soften under heat. Integrally colored with high quality pigments.

Parex USA Dry-Tex

NEW PRODUCT - A 100% dry acrylic-based textured finish. Mix on-site with water water and pigment. VOC free and freeze thaw stable Dry-Tex is made Dirt Pick-Up Resistance (DPR) meaning the surface of the finish hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants.

Dry-Tex is offered in two textures:

* Sand Coarse
* Sand Fine

View the Dry-Tex Mixing and Application Video

Parex USA Elastomeric Coating

A 100% acrylic Elastomeric non-textured coating. Highly flexible: can bridge existing hairline cracks. DPR (Dirt Pick-up Resistance): The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants. It provides excellent hiding power as well as flexibility and drying characteristics. The surface of the coating hardens and does not soften under heat. Integrally colored with high quality pigments.

Parex USA PrimeShield

Is a 100 percent acrylic-based primer that improves the mechanical bond of the finish to the stucco substrate. PrimeShield reduces the chance of efflorescence which may result from the cement content of various bases. It also enhances the appearance and uniformity of the finish. The product is water-vapor permeable and does not create a vapor retarder.

Parex USA Pro-Tect (formerly Crown Seal)

Pro-Tect is a clear water repellant used to protect stucco, masonry and mature concrete from water, enhancing the beauty of cementitious stucco, masonry and mature concrete by improving stain resistance. Pro-Tect maintains the beauty of stucco by reducing susceptibility to freeze-thaw damage, efflorescence, biological growth. Available in both one and five gallons.

Parex USA Quik Cure

Water-based acrylic curing membrane formulated to provide excellent performance in the water retention section of ASTM C 309. Provides a curing membrane over cementitious surfaces allowing acrylic finishes to be applied quickly, while protecting against delamination and efflorescence. Provides a sound, sealed substrate for a uniform finish over either stucco or concrete.

Parex USA Sandable Basecoat

A 100% Acrylic sandable basecoat that comes as a white base. It enhances the appearance and uniformity of smooth finishes. It can be easily recoated with Parex USA Allegro II. Ideal over EIFS basecoats, stucco basecoats, stucco finishes, and interior drywall.

Parex USA WeatherTech WeatherSeal BG

A Single-component, non-fibrated, asphalt modified, neoprene waterproofing membrane which can be either troweled, rolled, brushed, or spray applied. Designed to provide high-performance below grade protection from positive side water pressure. Allows low levels of moisture vapor to escape to prevent blistering and delamination of the applied membrane while prohibiting infiltration of moisture through foundation walls, footings, retaining walls, planter boxes and between slab. Solvent free formulation incorporate anti-microbial additive to prevent mold and mildew growth.

 

VIDEO: View the Parex USA Weatherseal Spray and Roll-On / Trowel-On Video

Parex USA WeatherTech WeatherBlock Spray & Roll On

A 100% Acrylic co-polymer fast drying vapor retarder, elastomeric waterproof and air barrier coating which can be either rolled, brushed, or spray applied. Is designed for use as vapor retarder behind exterior claddings. Is extremely flexible: can bridge cracks and accommodate small movements up to 1/32 in. (0.8 mm). Bridges 1/4 in. (6 mm) gaps at sheathing board joints with Parex USA 396 Sheathing Tape embedded.

 

VIDEO: View the Parex USA Weatherseal Spray and Roll-On / Trowel-On Video

Parex USA WeatherTech WeatherDry

An acrylic co-polymer based, waterproofing base coat. For use with acrylic and elastomeric finishes. Requires the addition of portland cement.

 

VIDEO: View the Parex USA Weatherseal Spray and Roll-On / Trowel-On Video

Parex USA WeatherTech WeatherSeal Spray & Roll-On

A 100% acrylic elastomeric waterproof membrane and air barrier which can be either rolled, brushed, or spray applied. Extremely flexible: can bridge cracks and accommodate small movements up to 1/32 in. (.8mm). Designed for use as water-resistive barrier behind El Rey EIFS or stucco. Bridges 1/4 in. (6 mm) gaps at sheathing board joints with 396 Sheathing Tape embedded.

 

VIDEO: View the Parex USA Weatherseal Spray and Roll-On / Trowel-On Video

Parex USA WeatherTech WeatherSeal Trowel-On

A 100% acrylic based, trowelable water-resistive barrier membrane. Designed for use as water-resistive barrier behind exterior claddings. Extremely flexible: can bridge existing hairline cracks and accommodate small movements.

 

VIDEO: View the Parex USA Weatherseal Spray and Roll-On / Trowel-On Video

Variance Specialty Finishes

Our latest addition to the Parex USA brand offering.

From Decorative to Abuse Resistant Wall Finishes, Variance offers products with unique textures and colors.

Click on the following link to view the Variance product offering: http://www.variancefinishes.com/.